IRON |
LOFT |
LIE |
WT |
OFFST |
BOUNCE |
LENGTH |
SWING |
3 |
18 |
59.5 |
242 |
4.8mm |
2 |
39.00” |
D0 |
| 4 |
22 |
60.5 |
248 |
4.8mm |
2 |
38.50” |
D0 |
| 5 |
26 |
61.0 |
254 |
4.8mm |
2 |
38.00” |
D0 |
| 6 |
29 |
61.5 |
261 |
4.0mm |
3 |
37.50” |
D0 |
| 7 |
32 |
62.0 |
268 |
4.0mm |
3 |
37.00” |
D0 |
| 8 |
36 |
62.5 |
275 |
3.5mm |
3.5 |
36.50” |
D0 |
| 9 |
40 |
63.0 |
282 |
3.5mm |
4 |
36.00” |
D0 |
| PW |
44 |
64.0 |
289 |
2.8mm |
5 |
36.00” |
D0 |
| GW |
50 |
64.0 |
296 |
2.0mm |
10 |
35.75” |
D2 |
| SW |
54 |
64.0 |
296 |
1.0mm |
12 |
35.50” |
D2 |
The S 400 iron compliments the S Square 400 driver by providing
the fitter the ability to customize trajectory in a high MOI
design. Weight ports allow for the clubmaker to dial-in the
sweet spot during the fitting process by placing weight where
the golfer needs it most.
PRODUCT HIGHLIGHTS
- 431-1 Face and Hosel for easier loft & lie adjustability
and great feel.
- Adjustable weight ports allow the clubmaker to achieve
either a fade, draw or neutral set up.
- Optional weights are available to dial in swing weights
for shorter or longer club lengths.
- Deep under cut cavity for low center of gravity.
- Weight distribution with weight ports at toe and heel
increases MOI of iron for better accuracy.
| DIMENSIONS |
MATERIALS, CONSTRUCTION & FINISH |
Inside Diameter: 8.6mm
Outside Diameter: 12.3mm
Bore Depth: 37mm
Bulge: 14°
Roll: 14°
Face Angle: 0° |
Construction: 2 Piece Cast
Face: Beta Ti 15-3-3-3
Body: 6-4 Titanium
Finish Paint: Black |
|
|
